What to Do If Your MacBook Pro Screen Goes Black and Unresponsive 2021?

Do you have issues with your MacBook Pro constantly crashing to the black screen? If you’ve been getting a black screen on the MacBook when you start it up, you’d know that this is a very serious problem, and it needs to be fixed. There is a need for a fix for this issue, and you also need to be sure if there is still a light seen on the MacBook keyboard.

If you haven’t had any issues with the Mac whatsoever and are just searching for commands that you would be able to use on your MacBook Pro or MacBook Air from recovery, it is important to know that the system doesn’t always respond to the commands either.

Now, if you’re someone that has faced the issue of your MacBook Pro constantly crashing to the black screen, there would be commands that people would have suggested for you to try out to fix these issues. These are solutions that are easily found on the internet, and they will be mentioned in this article as well.

If you’ve faced the issue of your MacBook screen crashing to black ever so often, then you can try some of the recovery commands to fix it, or the other option is to fix the hardware parts that are causing the problem. All you need to do for this is to open up the back cover of your system, disconnect and reconnect a few parts as will be guided in a step-by-step manner as you keep reading.

Firstly, it is understood that the issue at hand is the screen of the MacBook crashing to black because of a macOS update or because it was dropped. Regardless of what caused the problem, we will look at the solution that is available.

• Why does my MacBook Screen Goes Black?
• Updates that are Incomplete
• Issues that are Present Internally
• Can’t Boot Up
• Fixing the Black Screen Issue with the Apple Logo Missing
• 1. Using Commands
• 2. Fix the Hardware on MacBook
• Precautions to Keep in Mind

Why does my MacBook Screen Goes Black?

If you’ve had your MacBook Air or Pro keep crashing to the black screen, there may be multiple reasons behind this problem. It could be that there are some issues that are present internally or that it got some damage when it was dropped. Let’s look at a few reasons why you would have a MacBook Pro constantly crashing to the black screen.

Updates that are Incomplete

If you see that the MacBook was undergoing an update, and if you happen to force turn it off by accident or not before completion, this is an error that you may face. This is why, if your MacBook is going through an update, it is always best to wait until the update is over. Even if you need urgent work done, waiting is good because then you won’t have the system crashing because of an incomplete update.

Issues that are Present Internally

There may also be issues with the RAM slot or the SSD that may be present and that need to be checked. In case this is an issue caused by software-related problems, then you can fix it using the NVRAM commands. But if there is an issue caused by the SSD internally, then the only option is to fix it manually by opening up the case at the back.

If there is an issue with the connector and the battery or is hard drive-related, it too needs to be fixed. You also need to check the connectors to see if they are set the way they should be, in case the MacBook got dropped.

Can’t Boot Up

If you’ve seen a blue screen on your MacBook Air or Pro, it is important to understand that if the Apple logo does not come on with it, your Mac has power, but there are issues with the SSD. This is the reason behind it not being able to boot up properly.

In case the Mac isn’t booting up properly, the reason would be that it isn’t getting enough power, and this needs to be fixed as well. The solution could be either to leave it as it is and wait for it to get fixed or do something about it.

These are some of the reasons why you could have a MacBook Pro constantly crashing to the black screen,but these are not all of the reasons. There may be other reasons behind the black screen showing up or the Apple Logo not being present. The first thing you need to try is to test the reset commands or do the NVRAM reset. If neither of these is resolving the issue, then you would need to fix the hardware. Once you do all of this, the black screen issue will be seen resolved.

Fixing the Black Screen Issue with the Apple Logo Missing

In the case that the MacBook Pro constantly crashing to the black screen, then there may be many actions you may need to perform if you’re not aware of what the exact issue is. You can try the commands and reset the RAM and SSD, or the other option is to boot it up via the Safe Mode. All of these are options that you can try to fix this issue, and here we will look at this in more detail.

1. The first step is to press the power button and to see if the light is seen on the screen.
2. If you can see the light on the keyboard, you need to press the ‘Shift’ button that is on the keyboard and hold it for about ten seconds and then press the power button simultaneously. This will boot the Mac in the Safe Mode that was mentioned earlier.
3. The alternative option to try if the former method does not work is to reset the NVRAM using the following command: press ‘Option,’ ‘Command,’ ‘R,’ and ‘P’ simultaneously for about ten seconds.
4. The other alternative is to fix the hard drive from the hardware itself. You need to open the case and disconnect and reconnect this to see if the screen is fixed. If not a single one of these options work, and if you’re not an expert, it is best to go to a servicing center for professionals to take a look at your system.

1. Using Commands

Using commands is a very simple way to reset the internal hard drive of your Mac and have it work as it used to, and this can help with a MacBook Pro constantly crashing to the black screen. There are many commands that can be used for this, or you can boot it up in Safe Mode or Reset the NVRAM.

Reset the NVRAM:

>There is a very easy way to reset the NVRAM, and that is to press ‘Option,’ ‘Command,’ ‘R,’ and ‘P’ simultaneously for about ten seconds, and then press the power button at the same time as well. This will result in the NVRAM being reset, and this is a process that takes about 10-15 seconds. The MacBook will turn on with this if there are no issues or damage internally.

Restart from Recovery

There is another option that you can try to get it fixed, and this is from internet recovery. But the SSD would be working well, and the internet recovery mode would need the Apple logo to appear as you start it, and then it will work well.

Safe Mode

You need to press the ‘Shift’ button along with the power button at the same time for ten seconds to be able to boot the MacBook in Safe Mode. The MacBook will update in the Safe Mode, and this should fix the issue. But if this is not the case and the black screen is still seen, you would need to go to the next part of this guide that is to fix the hardware.

2. Fix the Hardware on MacBook

The next step to take if the command fixes did not work is to try and work with the internal hardware on the MacBook. Perhaps the case is that the SSD is not in the right place, and it got moved and disarranged when it was dropped. The other possibility is that maybe there is some corrosion in the connector that caused the issue to occur.

In this section, we will look at two parts that can be fixed, that is the battery and the SSD, as well as how to do it. If the power connection is from the battery, then the issue may be from the SSD where all the storage is.

Open the Back Case

It is important to make sure that the MacBook has been turned off before you open the back case because you will then avoid the shock that you could get from the hardware. You need to flip the laptop over, remove the screws, and then the case to see the hardware parts. Turn the fan on and off to see if it is working before you proceed to the next steps.

Clean the SSD

Once all this is done, open the case and see if the connector has been placed where it needs to be. If you see any issues, just disconnect the cable or unplug the SSD as well and then reconnect both backs. Clean any dirt that may be gathered there, check the connector well, and then replace it back properly.

Just unscrew the screws to be able to remove the SSD, and then be sure to place it back the same way again.

Disconnect the Battery

The same process has to be repeated with the battery cable as well. Just disconnect it from the processor onto your system. You need to unplug the connector, open the cable, clean out the dirt, if any, and reconnect all of it back. This is an easy process, and if the connector is what has been causing issues with the screen, it will now be fixed.

Precautions to Keep in Mind

1. When trying these sorts of fixes, especially ones that have to deal with the hardware, be careful only to let an expert handle it. Or do it yourself only if you are an expert so as to not damage the hardware parts. There may be further issues that you would have to face if there are any issues with the arrangements with the hardware pieces.
2. Be sure that there is a light on the keyboard when you press the power button on the MacBook, as this will mean that the system has power. But if there are issues with the SSD, then either fix the hardware part or replace it to resolve the issue. If you happen to see no light at all, then check the battery connector or the adaptor before doing anything else.

Conclusion

If you have issues with the MacBook Pro constantly crashing to the black screen then you would want to check the NVRAM reset commands and the directions given to be able to reset it. If the commands that you use are unable to resolve the issue, try to get the hardware fixed where you would have to check the SSD and hardware to see if they are connected and to disconnect and reconnect them.

But for hardware fixes, make sure only experts are handling it to avoid further damage. For more articles on resolving MacBook issues like MacBook Pro Trackpad is not Clicking, MacBook Pro keyboard is not working, and others kindly visit our website @NewsOzzy.com frequently.